Double axis vise Fixed bracket/雙軸虎鉗固定座

https://www.youtube.com/watch?v=2igdT1NIsDw&feature=youtu.be

這是一個非常實用的虎鉗，很適合用來固定小零件，
尤其是需要鑽孔的時候，可以讓物件固定的比較牢固，
但是由於原設計是使用左右兩個零件來結合，因此在施加較大的力量時，
虎鉗會發生分離的現象，以及鑽孔後所產生的粉屑會掉落在各處，
於是我將它做了一些小改造，讓它可以連接著塑膠盤，
可以避免使用時會分離的現象，也能將粉屑集合在一起方便清理。

這一組工具是我目前3D列印中最實用的，相信用過的人都會愛上它的。

This is a very practical vise that is ideal for fixing small parts.
Especially when drilling is required, the object can be fixed firmly.
However, since the original design is to use two left and right parts to join, when a large force is applied,
The vise will separate, and the dust generated after drilling will fall.
So I made some minor modifications to make it connect to the plastic tray.
It can avoid the phenomenon of separation when using, and can also collect the dust together for easy cleaning.

This set of tools is the most practical in my current 3D printing, I believe that people who have used it will fall in love with it.