October 25, 2019
Description
Vacuum Syringe Rocket Launcher
More info: https://youtu.be/Rbxa-3QVNU4
Print material: PLA, PETG, ABS etc
Required parts:
10ml Syringe
Glue
There are two trigger files as different syringes need different height latches. Also, the depth of the slot in which the trigger glues into will depend on the size of syringe handle, so glue it accodingly.
WARNING: Using a syringe in such a way can be dangerous. The atmospheric pressure acting on the piston applies a large amount of force which can be harmful if used incorrectly. Please also be aware that the launcher is not guaranteed to hold the syringe securely and therefore might launch unexpectedly. Keep face and fingers away from syringe once it is loaded. Use at your own risk.
The launcher is designed for the following syringe, but with small modifications, it should work for most 10ml syringes:
UK - https://www.amazon.co.uk/Pack-Syringes-Blunt-Needles-Storage/dp/B06XVST4FL/ref=sr_1_34?keywords=10ml+syringe&qid=1571990091&sr=8-34
USA - https://www.amazon.com/BSTEAN-Syringes-Blunt-Needle-Storage/dp/B01N562BFP/ref=sr_1_5?keywords=10ml+syringe&qid=1571990197&sr=8-5
License:
Creative Commons - Attribution
TomStanton
