Ninebot Max G30/G30D Trolley wheel stand [non-commercial license!]

New rule due to sellings of my design without proper credit:
Selling the prints of my Designs is only allowed for 10% revenue via my Thingiverse Paypal.me/bllfrnd Link and good visible listing of the link to my Design!

Trolley wheel stand for vertical placement of the scooter when folded. Note: There is a risk of the Scooter tipping to one side due to angled front wheel when folded and hooked in.

Fixation with hose clamp 60-80mm up to 10mm width and double sided adhesive tape (~1mm thickness) against rotation.
The G30D Version(s) use the upper threads of the orange reflectors on each side with M4x20mm screws and a washer Ø12mm.

Print specs from V1.2 G30D in photos: PETG (DasFilament), 3mm walls, 20% infill (Cura: Cubic Subdivision). Even withstands the whole Scooter wheight on one wheel.

Wheels: Ø 80mm, width 26mm with bearing, axle Ø 6mm*40mm.

G30D Versions are not for the normal G30. The G30D Versions use the threadings of the reflector on the stem for fixation. The normal G30 doesn´t have these threadings.

Screenshot model color:
Blue =G30D only
Orange = G30 / G30P / G30LP and others
Green = all G30 Versions

Updates:
V1.1 Hose Clamp Stem Protection: thicker, higher, rounding should fit better against stem, cutout for weldings

V1.1 G30D and G30 Trolley: cutout widened for hose clamps up to 12mm width.

V1.2 G30D Trolley: width for cutout for reflector widened, was to narrow before. + now angled to fit the angled reflector frame better.

V1.0 200mm G30D Version added for 200mm print beds.

Old Versions are now removed.