Summary

A screw on adapter for the Belted Extruder v4 allowing you to attach the Palette 2 directly to the input side.

BOM:
2x m3 10mm screws (or 2x m3 8mm - look in Custom Section)
2x m3 nuts (if not already installed)
1x Original grommet from Palette 2

Print Settings

Printer:

BeTrue3D xBot Medium

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0,2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>40</p></div></p>                                                    <strong>Filament:</strong> 3DE PLA                White                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Resolution is not important.</p></div>

Post-Printing

            <p class="detail-caption"><strong>Grab a hold on the support with a small plier</strong></p>                <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/cc/4d/fb/8b/2f/IMG_5497.jpg"></p>            <p class="detail-caption"><strong>Support removed</strong></p>                <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/85/dc/90/7e/7a/IMG_5498.jpg"></p>            <p class="detail-caption"><strong>Dig out your original Palette 2 grommet</strong></p>                <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/b8/c7/19/a3/90/IMG_5499.jpg"></p>            <p class="detail-caption"><strong>Insert the grommet from either side.</strong></p>                <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/87/8a/0e/ac/0e/IMG_5500.jpg"></p>            <p class="detail-caption"><strong>Insert 2x m3 nuts into the cut outs in the Belted Extruder v4</strong></p>                <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/50/53/98/a8/d6/IMG_5502.jpg"></p>            <p class="detail-caption"><strong>Unscrew the push-fitting from the inlet side.</strong></p>                <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/d7/7a/6e/3d/22/IMG_5503.jpg"></p>            <p class="detail-caption"><strong>Screw on the adapter using the 2x m3 10mm screws and insert the PTFE tubing from the Palette 2.</strong></p>

Custom Section

Using m3 8mm instead of 10mm screws

            <div><p>You can sink the object down 2mm in your slizer in order to use 8mm screws instead of 10mm if needed. I just made it for 10mm to ensure sufficient stiffnes.<br>I havn't tested the difference.</p></div>

Belted Extruder v4 Palette 2 adapter

Belted Extruder v4 Palette 2 adapter

Related Models