November 1, 2019
Description
11/6/2019 UPDATE:
I re-uploaded new stronger parts.
Print with supports.
Print is sized exactly, so increase the scale to account for any shrinkage.
Will post assembly instructions later.
Uses 4 608 skate bearings.
0.5in ball bearing or bullet.stl used for detent.
Spring under detent ball is approximately 3/8 inch diameter and 1/2 inch long.
Bearing fit into either side of the u joints.
an 8mm or 5/16inch bolt is used through the bearings.
An 8mm or 5/16inch bolt is used for the handle rod.
V-156-1C25 type micro switch is used. 8 qty.
https://www.amazon.com/gp/product/B07GXD9DZ1/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B07GXD9DZ1&linkCode=as2&tag=craftsbydad-20&linkId=2921452bb8379ea775892b3eeafd2e8d
Zero Delay arcade board is used for the switches.
https://www.amazon.com/gp/product/B07GXD9DZ1/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B07GXD9DZ1&linkCode=as2&tag=craftsbydad-20&linkId=2921452bb8379ea775892b3eeafd2e8d
License:
Creative Commons - Attribution - Non-Commercial
Slowmo5o
