November 5, 2019
Description
Wherever our Fully 3D-Printed Rubik’s Cube Solving Robot is shown off, it always generates lots of excitement and curiosity, be it a classroom full of kids, an office full of co-workers, or a trade show floor full of attendees. Now there is a way to bring about even more excitement and curiosity, even before the robot is unveiled. Just carry it into the room in a case that is also fully 3D-printed!
This carrying case was designed specifically with the robot’s dimensions in mind. The robot will fit in it perfectly with plenty of room for accessories. By no means a small project, the briefcase requires a printer with a large print platform, such as Creality CR-10, as some of its parts are outright massive. There are 44 parts overall, and you will need a big bag of metric M3-12 bolts and M3 nuts to hold them together.
Please note that while this carrying case will do a great job protecting your robot’s delicate machinery as you haul it around town, a shipping container IT IS NOT!
Parts List:
| Qty | Filename |
|---|---|
| Body & Lid Segments | |
| 2 | bc_a.stl |
| 2 | bc_b.stl |
| 1 | bc_c.stl |
| 1 | bc_d.stl |
| 1 | bc_e.stl |
| 1 | bc_f.stl |
| 1 | bc_g.stl |
| 1 | bc_h.stl |
| 4 | bc_i.stl |
| 2 | bc_k.stl |
| 2 | bc_l.stl |
| 1 | bc_m.stl |
| 2 | bc_n.stl |
| 1 | bc_o.stl |
| 1 | bc_p.stl |
| 1 | bc_s.stl |
| 8 | bc_corner.stl |
| Latches & Hinges | |
| 2 | bc_hinge.stl |
| 2 | bc_latch_top.stl |
| 2 | bc_latch_bottom.stl |
| 2 | bc_latch_buckle.stl |
| Handle | |
| 2 | bc_handle_base.stl |
| 1 | bc_handle_half1.stl |
| 1 | bc_handle_half2.stl |
For assembly instructions, please visit www.otvinta.com/download16.html.
License:
Creative Commons - Attribution
otvinta3d
