November 9, 2019
Description
A simple Xiaomi m365 scooter mount for Xaiomi A2 Smart phone with case.
The print has 2 pieces to print and then snap together.
and you need a M4 Screw 20mm long.
There are 2 Versions of the Holder
V1 is Horizontal and a short Leaver for the Phone.
V2 is Tilted by 9 deg and has a Longer Leaver.
V2 - is more stable during rides.
you Should orient the print on it side that way you will need no support and have good tensile strength.
The print has a tolerance of 0.1 mm in tight places.
License:
Creative Commons - Attribution - Non-Commercial
Klingman
