Gatehunter X Canopy

This is my new canopy for larger 3-5" Toothpick whoop sized / AIO powered builds. It's specifically designed for increased camera and electronics protection: - The "Horseshoe" cut out de-couples the camera mount from the remaining canopy - The big arches absorb side impacts and redirect the force to the base of the canopy - The fin ensures stiffness on vertical impacts - A protective lip around the camera prevents the lens from being scratched Check out my Youtube Series on the [Gatehunter X 5](https://www.thingiverse.com/thing:3941036) Inch Toothpick for more information on the whole project. I recommend printing this at 40% infill. The result will be around 5.5g. You can vary the infill according to how much stability you need for your build. This canopy fits the [Lumenier Micro Axii shorty](http://bit.ly/2MnrsaU) and I strongly recommend using this antenna since the FPV image quality is significantly better compared to a simple linear antenna. However, I will keep updating this page with new variations for other antenna types as soon as I find some time to do the designs! *Suggested Camera options:* - [Runcam Nano 2](https://www.banggood.com/custlink/KDDmImAR3G) (best value for money) - [Foxeer Predator Nano](https://www.banggood.com/custlink/K3mv4YcOj3) *Youtube:* [5 Inch Toothpick Part I](https://youtu.be/ihLv92JoU9o) [5 Inch Toothpick Part II](https://youtu.be/RaN0XFgy7BY) (see for discussion of the Canopy) [5 Inch Toothpick Part III](https://youtu.be/enM4j2NP7aU) [5 Inch Toothpick Part IV](https://youtu.be/kv3HJZRaE_4)