F250 Badge

The side badges for 99-07 Ford F250 Created in Fusion 360

V1.0
The First version of the side badges which was designed to mimic the 1999-2004 F250 badges

V2.0
The second version of the badges which was designed to mimic the 2005-2007 F250 badges

V3.0 (Not compete yet)
A third version is in the works to be a DIY light-up badge that is similar to the Recon badges that are no longer offered for the 99-07 F250s

Printing V1.0 and V2.0:

Orientation - For the best result print the badge vertically (As it would sit on the truck) such that the layers are horizontal when the badge is mounted

Resolution - 0.2mm or 0.1mm the thinner they layer height, the less work will be needed to make the badge look better after printing; however, the badge will take a long time to print

Bed Adhesion - I had the best luck printing on a raft that was 3 layers thick and starting with the bed temp at 65c then lowering it to 50c after the first layer

Supports - "Tree" supports worked well for printing the model vertically

Printing V3.0:
Will BE UPDATED WHEN MODEL HAS REACHED ITS FINAL FORM
10/29/2020 Update: I still plan to revisit this someday