November 12, 2019
Description
Update 2019.11.26
Version 2 is clickable without glue.
With slightly stronger soles.
For reassembly it must be forced. Be careful because you can break it.
The sole is asymmetric, so you need to mirror one when printing.
Place the tab inside.
It broke when I pressed the battery onto the Velcro.
The original is too expensive and too crappy.
They were really upset, so I was planning a better one.
I designed it to be lightweight and flexible to absorb hard landing or hard battery loading.
Due to its easy printability and optimum orientation of the layers, it has to be glued or welded together in several pieces.
Hope someone else will find it useful.
Material: PETG
Layer: 0.2
Nozzle: 0.4
Head temp:240°C
Speed: 60/30
Cooling: Yes
Support: No
License:
Creative Commons - Attribution
KeriL
