HG P407 / Tamiya Bruiser Front Servo Mount Revisited

I wasn't too happy with the current offerings when used with my servo, so I modeled up a new mount trying to alleviate any excess bump steer. This mount lowers the servo to make the steering rod mount to the back side of the servo horn. I will post a pic when I get a new steering rod in. You need about a 75mm long steering rod from eye to eye. The servo I used is a servo from ebay titled "Waterproof DS3218MG Digital Servo 20KG Torque Metal Gear For RC Car Robot Accs". Like I said, this worked for my setup. I figured I would share this in case anyone wanted another option =)

NOTE: The spacers have the holes offset to one side slightly. Look at the sides of the servo mount for reference when installing.