Lezyne GPS Bike Mount

Bike mount for Lezyne GPS. Reworked slightly from original design to aid 3D printing. I used PETG for this but other filaments may be OK although I wouldn't recommend PLA. 50% Infill is ok for maximum strength and ensure you've got good layer adhesion. I used supports with a 70 degree setting. Main Bracket can be printed as per download but the clamp is better on it's side
Just add 2 x M4 allen key head and Nylock nut for the clamp as per the original and maybe a little foam / rubber in the inside of the clamp to protect the bike.