Box Mod -Botton Feeder- Mark IV

Box Mod e-cig X:55mm; Y:75mm; Z:25mm; DNA 30 and 18650 battery

more on:
https://www.shapeways.com/shops/vasodipandora

Build a box mod ( Bottom Feeder ) google translate from http://www.esigblog.com/2013/02/05/costruirsiunaboxmod/ ,

1. A BOX here u can buy a box ,
2. SILICON TUBE http://www.svapamo.it/store/Tubo_Silicone_Bottom_Feeder ,
3. Dropper Bottle 3ml-6ml http://www.svapamo.it/store/box_mod/Bottiglia_LDPE_Bottom_Feeder_3ml or http://www.japancentre.com/items/chuo-kagaku-rectangular-sauce-bottles-small-catering-size ,,,,
4. (BUTTON) http://www.svapamo.it/store/box_mod/Pulsante_Acciaio_Cromato_12mm_Viti or http://www.svapamo.it/store/box_mod/box_mod_fai_da_te/Pulsante_Acciaio_16mm and 6mmx6mm buttons http://www.svapobar.it/21-mod-box-fai-da-te http://www.plexishop.it/it/micro-pulsante-tattile-6x6-mm.html ,
5. (AGO / NIP) That small tube of metal is to be inserted in pressure in the silicone tube and must be paid (or press-fitted ) to the center pin of the connector . I usually use the small tube of CE2 or phantom , after they have been cleaned of any welds and after them correspondence so as to favor the adhesion of welding after . Eye to buy tubes of pure steel , because after solder tin will not be easy . Much better to opt for these tubes of metal alloy more malleable . Usually the tubes have an external diameter of 2 mm and 1.5 mm internal . http://www.svapamo.it/store/Tubo_Acciaio_Bottom_Feeder_sst2 ,
6. ( CONNECTOR ) http://www.svapamo.it/store/connettore_510_forato_bottom_feeder ,
7. ( MUG / CUP ) http://www.svapobar.it/mod-box-fai-da-te/931-vaschetta-completa-pre-assemblata-box-mod.html ,
8. ( CABLES ) Obviously you'll need copper cables . Cables that have a large diameter , not making use of the microcables twisted pair, I recommend, because species from the circuit to the connector center pin and pass several amps and need a cable " important." ,
9. ( BATTERY ) Strictly AW , always , I recommend it.?Alternatively Efest or NCR. ,
10. ( CONTACT / BATTERY) Even these can be found in the shop of esig , at a good price . ,
    PARTS NOT LISTED 1a ) Tin : Tin will need to solder and flux ; ,
    TOOLS REQUIRED 1 ) Soldering tin? 2)glue ,
    DNA30 by Evolv: Dna 30 by evolv (The DNA system lets anyone build Evolv's revolutionary power regulated technology into their own products. The DNA 30D is a power regulated digital switch-mode DC-DC converter for personal vaporizers. It offers controlled power from 7 to 30 watts, runs from a single lithium cell and includes protective features such as overcurrent, over and undervoltage protection and a thermal shutdown. It features a small OLED display, analog or digital user controls, power adjust lock, onboard buttons and synchronous rectification for maximum battery life and minimal heat generation. The DNA30D is the same size as the DNA20D.) http://www.bargainvapour.com/Evolv_DNA_30D_with_bulk_discount_in_stock!/p1274299_10924929.aspx video (ita): https://www.youtube.com/watch?v=AXf4UJHYyIw ,
    Elenco elementi da comprare per completare la box:
    vaschetta preassemblata ldt (o simili),
    tubicino in silicone,
    Pulsante ,
    2 micropulsanti 6mm X 6mm ,
    contatti batteria ,
    boccetta 5 ml (giapponese),