This is a derivative from "Achocho's Frame Brace V2" for the Creality CR10-S Pro.
Compared with the original designs this version uses much less filament and is as strong.
You will save about 16% of filament for each top part and more than 50% for each bottom part.
And the bottom part will no more hide the Creality logo on the front panel.
Note : the holes in this version are for M8 threaded rods (8mm tn diameter). I will soon upload a new (even lighter) version which will include a 6mm and a 10mm version.
=====================================================================
EDITED (V2)
=====================================================================
I have uploaded a new version which is even lighter and comes in 3 threaded rods sizes : 6mm / 8mm / 10mm.
The names of the parts for this new version are all ending with the threaded rod diameter.
Parts without the diameter in their name are V1 and are designed for a 8mm threaded rod.
The bottom part has been redesigned to allow some flexibility that is welcome.
With this new version and compared to the originals, you will save more than 35% of filament for each top part and more than 70% for each bottom part without compromise on rigidity.
If you don't know which version to print I strongly suggest V2 (parts having names ending with a diameter indication).
Cheers
Note :
YOU CAN'T MIX V1 and V2 PARTS SO MAKE SURE TO PRINT COMPATIBLE TOPs AND BOTTOMs.The photo shows all versions : original Achocho's version (right), V1 (bottom left - black) and V2 (top left).
Anar
