3D Print Boiliemachine 15mm

Here you have an almost complete boilie machine. The roll is 105mm wide.
Maybe ABS is best if you can keep it straight and than vapor smoothing just the grooves.
You will need some threaded rods and glue to fix it in place.
Of course the length of the boilie roller is up to you.
have funn...

EDIT : Ok...I forgot I had another one lying around.

Option 2 (opt2 files) is a better option.
You'll be needing a PVC pipe of 70mm outer and 67mm inner.
And 2 ball bearings (22mm outer) (8mm or bigger inner) (7mm height).
The back plate is now printed without support so the grooves will be smoother.

EDIT 2 : Made one for 18mm boilies, diameter 110mm.
I have not tested this one but I think the measurements are OK.

• 18mm left.stl
• 18mm right.stl
• 18mm Ring.stl
• opt2-cap.stl (2x)

( This boilie machine is brought to you by https://www.boiliemix-berekenen.nl/en/ )