Kelant Orbeat D100 D200 / platform head upgrade V1

UPGRADE:
Have a look to the V3:
https://www.thingiverse.com/thing:4059580

Hi, this is a simple idea to improve the stability and strenght of the printing platform.
This idea borned after view that the screw that the platform has from factory has some undesired flexion when the printer raises the Z axis and the platform has to do some strenght to unstick the objects from the VAT.

After test this improvement I can say that some objects printed before without success, now are finished without any problem!

I hope it helps you!

Material needed after printing the new platform holder:

4 x Screws of at least 60mm long X 4mm diameter (real measure 3.87mm)
Ideal if it has a round head.

4 x Screws of at least 12mm long X 4mm diameter
8 x Nuts 4mm
4 x Washer 4mm
1 x Nut 10mm

Please, have a look to the pictures to see what kind of material is wich I am talking about

Notes:
1 - Printing the piece with the big hole upwards will improve the strenght of the printing.
2 - something more that I just forget ... ups. I hope it is unimportant! I will post it if I remember.

Ahh, another thing ... of course, you have to work with 4 of the holes of the platform and make the screws thread!!!

---

Well, it is a little embarrassing for me, but... If you like my designs, please think about donate on my PayPal -> [email protected]
Thanks! It will help and motivate me to continue creating new and better models.

---