Wemos D1 Mini (esp8266 clone) case for 5v WLED christmas lights

This case is for a D1 mini and can easily be used for other projects as I have supplied a copy with no holes for you to drill your own where needed and also the Fusion 360 and step files are supplied. It has around 10mm of space under the D1 mini for wiring and electronics and a gap to run wires from top to bottom of the board.

This case was designed to install inline between a power supply and NeoPixel (WS2812B, WS2811, SK6812, APA102) LED string. See the photo of the white box at the start of the Christmas lights which is a $3 cloned D1 mini running the WLED opensource project.

It has the following features:

Clip on lid that needs no screws or glue to stay in place.
Allows usb port and reset button to be accessed easily with a pen or pin. Some boards have reset on opposite side hence why the case has both.
Lid holds the d1 mini in place without needing glue or screws.
Room for power sockets, electronics and wiring inside the case.
Prints with no supports needed if your printer can handle 60 degree overhangs.

Please hit the LIKE button to help people find this case quicker and if it does not work for you please let me know in the comments which version d1 mini you have and why it did not work. There are a lot of variants so hopefully this works with all/most of them. I have noticed some boards need a quick file down the edges due to the PCBs getting snapped instead of cut out of the pcb panels, so if tight just rub the edges with sandpaper or file.