Quadcells Delta Bot 3D Printer Build (310mm Bed, 1 Meter Tall)

https://www.youtube.com/watch?v=NWMInhy16rM

NOTE, this thing is published without a complete list of hardware (nuts & bolts used) and instructions. I will update in the near future.

Quadcells Delta Bot:
1 meter tall/310mm diameter bed and approximately 450mm in Z

It took me 2.5 years to get this build the way I wanted it by trial and error (I am a bit slow). Mostly learning from all of you in the 3D printing community.
I would like to Thank everyone in this hobby for your help/guidance and experience. If it wasn't for you all, this build would not have happened.

I used reference designs from a few Thingiverse member and I have noted them here to give them proper credit for their work.
I have also design many components of this build to suit my needs.
I would like to share my build with all so you too can build a Delta 3D printer.
You should be able to alter different aspects of this build to suit your build desires.

Tho this design is not perfect nor the instructions, I believe you will be able to build a wicked awesome Delta 3D printer.

Files to be printed:
All stl files that are in "Thing FIles"

Files that need to be printed that are remixes:
Duet_Wifi_case.stl & Duet_Wifi_case_cover.stl are a remix of Ocie's Box - Enclosure for Duet Wifi - V3
Stepper_Motor_Cooling_Shroud.stl is a remix of the NEMA 17 Stepper Fan Adapter 40mm by SergeyDSI

Files used in this build from other projects designed by me:
Delta Linear Rail Carriage Adapter for GT2 6mm wide 2mm pitch Belt Tensioner used w/Duet's Smart Effector Carriage PCB
Lg Delta 3D Printer Anti Vibration Feet (Remix of CR-10 Anti Vibration Feet)
Berd Air Type Tube Mount/Jig For Smart Effector/ E3D V6 & Mosquito Hotends
New Gimble For The Nimble/ 2020 & 1515 Aluminum Extrusion
Delta Top Filament Dry Box & Filament Guide
Layer Cooling Air Pump/Motor Anti_Vibration Ball & Floating Mount
Lg. Delta 3D Printer Under Frame Base (500mm Horizontal Beam)

Electronics:
4 of Moons 0.9deg NEMA17 Stepper MS17HA6P4200 or equivalent. You can use a lower quality stepper for the 4th tower.
Duet 2 WIFI
PanelDue 7i optional.
Delta Smart Effector
MeanWell LRS-350W-24V or equivalent.
KEENOVO Circular/Round Silicone Heater Pad,Dia 300mm,110V 500W or 220vac, your preference (heater is controlled using a SSR)
OMRON SOLID STATE RELAY 10amp 240vac or equivalent.
Wyze Cam V2 or equivalent and optional.

Hot End:
ALL-METAL E3D V6 HOTEND, 24v,175mm
or
THE MOSQUITO HOTEND, 24v, 175mm

Extruder:
I used [Zesty Technology's Nimble extruder(https://www.filastruder.com/products/the-mosquito-hotend?_pos=7&_sid=905b40053&_ss=r) at the time of this build I used the v1.

There are other options you can pursue. You could use the 4th tower for a extruder/stepper shortening the bowden tube.

Hardware:
Set of 6 400mm custom MagBallArms by Haydn Huntley
Set of 12 MagBalls
Set of 3 of ULTIBOTS METAL CORNER You need 3 top 40mm tall corners and 3 bottom 60mm tall corners.
3 of LDO Linear Rails 700mm, MGH12H carriages or equivalent.
GATES 2GT BELTS 6mm wide 8.5meters
1 of 310 DIAMETER MAGNETIC BASE PLATE
1 or more of 310D BLANK SPRING STEEL SHEET or equivalent. I use Powder coated PEI.
3 of OpenBuilds T Joining Plate For mounting the 310mm dia. magnetic plate to the V-Slot 20 x 60 x 500 horizontal beams.

3 of OpenBuilds V-Slot® 20x40 Linear Rail 1000mm length
3 of OpenBuilds V-Slot® 20x40 Linear Rail 500mm length
3 of OpenBuilds V-Slot® 20x60 Linear Rail 500mm length
4 of GATES 2GT PULLEY 16 TOOTH 6MM
4 of GATES 2GT IDLER Toothed 6mm

4th tower:
1 of OpenBuilds V-Slot® 20x20 Linear Rail 1000mm legth
3 of OpenBuilds Xtreme Solid V Wheel Kit
1 of OpenBuilds 65mm x 65mm V-Slot Gantry Kit - 20mm
1 of OpenBuilds 6mm Eccentric Spacer
2 of M5 6mm height Aluminum Spacers
3 of M5 nylon lock nuts