Catalyst Machine Works - BangGod Frame - TPU Parts

Important: Make sure to download the latest files here, I am no longer uploading to Thingiverse: https://www.printables.com/model/164508-catalyst-machine-works-banggod-frame-tpu-parts

These are prototype TPU parts for the Catalyst Machine Works 6" Frame. This is under contstruction, so expect changes, nothing is perfect yet.

CRSFAntennaHolder_v20.stl:
Antenna Mount for 1x TBS Hand-Tuned CRSF in the middle and 2x TBS Pro LHCP for the Air unit on the sides.
=> After printing I cut the two thin tubes along the full length on the front with an exacto knife, through this cut I then inserted the antenna-cable. I also added some shrink tube, but that is no really needed.

CRSFAntennaHolder_Mini.stl
Antenna Mount for 1x VAS Mini CRSF Antenna in the middle and 2x TBS Pro LHCP for the Air unit on the sides.
=> After printing I cut the two thin tubes along the full length on the front with an exacto knife, through this cut I then inserted the antenna-cable. I also added some shrink tube, but that is no really needed.

CRSFAntennaHolder_DjiOnly.stl
2x TBS Pro LHCP for the Air unit on the sides, no Antenna in the middle.
=> After printing I cut the two thin tubes along the full length on the front with an exacto knife, through this cut I then inserted the antenna-cable. I also added some shrink tube, but that is no really needed.

ledHolder_v3.stl:
LED Mount for this: https://www.catalystmachineworks.com/products/circular-rgb-led-board-sw316-an?_pos=10&_sid=5818da0e6&_ss=r

GPS_Mount_v4.stl:
Is only if you don't use a GoPro for this part: https://www.aliexpress.com/item/32917782967.html?spm=a2g0s.9042311.0.0.5e084c4dUY4j20

Print in TPU.