Orleans Board Game lightweight (TMG base game) insert organizer

Here's a mashed up organizer for Orleans Board Game, just the base game. There are many other more clever inserts on thingiverse you should use that are more space efficient and include expansions, but this might be the lightest one (?) and since I already had some things in use, I didn't want to start over.

There is no issue storing this vertically, the box fits snug and the boxes are designed to sit flush with the base game boards on top. You could put the boards below also and I've had no spillage. There is a curved side for ease of removal.

If you're using my chip organizer
https://www.thingiverse.com/thing:3462668
and the chips
https://www.thingiverse.com/thing:3359223
then this insert could work for you.

Set printing with 0 top and 0 bottom layers, 15% honeycomb infill, 0.28mm layer height. The walls are designed at 0.86 mm width (2 extrusion widths should fit and no gap fill). I usually hate gap fill for these boxes since it adds an extra extrusion which adds a lot of time. The longest box here took my settings about 2 hrs, all the rest will be 20mins-1hr. Weight of plastic was 132g (without the chip boxes linked above) about 8hrs total of printing.

NOTE: orleans_goods_1_mirror.stl is a 'mirror' placing the curved side on the opposite wall. This box is not symmetrical, so if you want the curve to be on the outer edge of the game board when you place the box, you'll need the mirror version (not shown in photo).
The reason is the cloth tiles go in the smallest compartment, and to maintain the order of the goods shown on the board. (like it matters...)

If my design works for you, please consider buying me a coffee (preferably a beer!)

https://ko-fi.com/schleprocker

Also on printables

https://www.printables.com/social/258712-schleprocker/models