Based on the Degrees of Freedom ring box.
Check out the original design at https://www.instagram.com/degreesoffreedomco/
This is a fidget toy that opens up in a fun way. Print 3 of each piece and then use 6x M3x10mm button heads to assemble. No need to print with supports. The counterbore holes have 0.2mm skin to help with bridging. Just use a screw from the reverse side to break that layer.
Use 5mmx2mm magnets. Install once the box is assembled to get the correct orientation.
I've included a .STEP and Solidworks Assembly for those who want to modify or play with it digitally.
Files have been optimized for 0.2mm layer height.
5mmx2mm Magnets: https://www.amazon.com/s?k=5x2mm+magnets&crid=3QGOQ786RJRCY&sprefix=5x2mm+,aps,197&linkCode=sl2&tag=eman04d-20&linkId=5d0bd0137b0584bf37e14e4f0075836c&language=en_US&ref_=as_li_ss_tl
M3x10mm Button Head: (Make sure they are normal and NOT flanged.)
https://www.amazon.com/s?k=m3x10+button+head&linkCode=ll2&tag=eman04d-20&linkId=2d9011da0756ff48d56187cfb37d968a&language=en_US&ref_=as_li_ss_tl
emancarrillo
