Wyze Cam V2 Housing Remix with Lexan Insert

This is a remix of Wyze Cam V2 Housing" by greenlee. I modified the main housing so it is now slotted for a piece of 2.5mm x 61mm x 54mm polycarbonate (lexan) can be installed to protect the front of the Wyze Cam.

It no longer has the slot/groove for the glare shield, I may add it back at a later time.

However if you want to use the glare shield, an option is to print it (remove the tongue) and glue it back on with some adhesive (I recommend Weld-On 16). I didn't include the shield, go grab it from the original thing.

Print with supports so the overhang for the polycarbonate will print properly.

Can also use acrylic sheet instead of polycarbonate. Slightly sand the edges of the polycarbonate to bevel so it will slide in easier. Seal with a bead of silicone to make it more weather tight.