Summary

Designed in ZBrush and printed on a CR10S4.
Roughly 4mm thick
Used S3D for slicer and printed upright.
Support was 4mm and 45deg angle.
3 Outline perimeter shells
Can print on raft and without.
Temps may be different for you, depending on filament used
Bed at 60
Extruder at 210

SIZE in mm and inch (resize in slicer if needed)
X: 165.10mm - 6.5 inch
Y: 116.11mm - 4.5 inch
Z: 144.23 mm - 5.6

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>CR-10S</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>Printed at both .15 and .2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>15%</p></div></p>                                                    <strong>Filament:</strong> Zyltech PLA                Black

Post-Printing

                <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/f1/59/d7/1f/38/69063.jpg"></p>

Death Stranding Higgs Mask

Death Stranding Higgs Mask

Related Models