Kelant Orbeat D100 D200 / Plate holder Upgrade By Onasiis v3.1

This is a simple upgrade for the printing plate holder. More stable and strong.

This is a simple idea to improve the stability and strenght of the printing platform.
This idea borned after view that the screw that the platform has from factory has some undesired flexion when the printer raises the Z axis and the platform has to do some strenght to unstick the objects from the VAT.

After test this improvement I can say that some objects printed before without success, now are finished without any problem!

I hope it helps you!

Material needed after printing the new platform holder:

4 x Screws of 20mm long X 4mm diameter (real measure 3.87mm)
Ideal if it has a round head, allen head)

4 x Screws of 15mm long X 4mm diameter
4 x Nuts 4mm
4 x Washer 4mm
1 x Nut 10mm

Please, have a look to the pictures to see what kind of material is wich I am talking about

Notes:
1 - Printing the piece with the big hole upwards will improve the strenght of the printing.
2 - You have to work with 4 of the holes of the platform and make the screws thread!!!
3 - Print the pieces at 100% infill if it is possible. It will be much better.

---

Well, it is a little embarrassing for me, but... If you like my designs, please think about donate on my PayPal -> [email protected]
Thanks! It will help and motivate me to continue creating new and better models.

---