This is a full package of all the adapters I made for my IKEA MILLBERGET desk chair (I didn't want to bother creating separate things for each design).
For more details see the video: https://youtu.be/UbWvdROnuMc
If you like it consider a small tip: https://paypal.me/PeterMakesThings?locale.x=en_GB
Here's the list of included models:
- Chair armrest mount - large -> to be mounted on the front of chair armrest, requires two M6 screws, needs to be printed in PETG!
- Chair armrest mount - small -> same as above but half the size, needs one M6 screw only
- Chair armrest mount - nut cover -> holds the nut so it can be tighten by hand
- Chair mount cover -> cover for the armrest mounts when not in use (the armrest mount has some sharp edges so this is to prevent any scratches)
- Chair side mount -> used to hold accessories on the side of a chair (both L and R versions available)
- Chair side mount insert -> fits into the hole for screw holding the MILLBERGET chair armrest (use the original screw), slide 'chair side mount' on it
- Chair Vibration motor mount -> holds the PS3 gamepad vibration motor, to be used with SimHub ShakeIt (search YT for how to guides)
- Chair Vibration cable mount -> just for cable management of the wires coming out from vibration motor
- Button Box Body -> search for 'amstudio' button box manual video on how to do all the electronics
- Button Box Cover
- Logitech M570 chair mount -> needs 2 x M5 25mm screws and a couple of washers
- Logitech M570 holder -> it is a remix of the design by 'rsheldiii': https://www.thingiverse.com/thing:2334293/files
- TM HOTAS Joystick t.1600m mount -> needs M6 screws to hard-mount the joystick, L and R versions depending on which side you wish to use it
- TM HOTAS Throttle mount -> needs M6 screws to hard-mount the throttle, L and R versions depending on which side you wish to use it
- TM TH8RS chair mount -> simply slide it into the desk clamp
PeterMakesThings
