Ender 3 (Pro) Spring Guides

Update - 02/01/2020 - The spring guide for the cable mount is now compatible with the cable chain mount from https://www.thingiverse.com/thing:2920060

Initial upload - 01/01/2020

Note that these guides are designed for springs with an outer diameter of 8mm.

Why?

The original compression springs on my Ender 3 Pro print bed mount were buckling.
To ensure that the springs stay in shape while being compressed I made these guides.

What does it do?

You should end up leveling your bed less often with these.

Files included:

• Top part
• Bottom part
• Shorter bottom part for the original cable mount / cable chain mount

Optional hardware:

• 4x nut M4
• 8x washer for M4

What to print:

• 4x Top guide
• 3x Bottom guide
• 1x Bottom guide for the original cable mount

• Note that if you don't want the thread on the upper guide just print the lower guide 7 times (+1 for the cable mount) instead.*

Your feedback:

Anything you would change? Just let me know.