Fanatec Csr Elite Pedal Inversion Kit

Update (5-22-2021):

These are the final revision of the inversion brackets for the fanatec csr elite pedal base.

I've uploaded two versions of the brake bracket depending on your print area, but I highly recommend using the full size version since it prevents the downwards movement as experienced in previous versions. If you have previously printed past versions and don't want to print the whole set, just print the full sized brake bracket.

Since the pedal positions are dependent on preference, you will need to drill holes within the slotted portion to allow a bolt/screw to pass through to secure the other end of bracket to the base. Another single fastener is sufficient. IMPORTANT: Ensure the hole you drill does not interfere with the circuit board at the bottom!

Print with at least 60% infill, parts printed on their side may be slightly stronger at the cost of more support material. Enjoy