January 2, 2020
Description
https://www.facebook.com/3DprintedAirsoft
UPDATE - 08.09.2020
QD sling point fixed, so its actualy here,
Stock inself updated so its compatible with my version of cheek riser
butstock and its locking mechanism updated to macht look of original one
kihope - 26.09.2020
-Fix derp in buttpad locking hole and locking latch
Hello guys, here is recreation of AK 12 stock, hole for buffer tube is 30 mm, with 3d prints accuracy you may need sand it a little depending on your buffer tube.
What you want do?
depending on your buffer tube you may need shorted a bit locking pin, however you shoudl have enought space,
butstock locking mechanism need spring with iner diametr more then 8mm and outside les then 11, so if you dont have this spring and you will not slide that butstock, just print dummy purt and lock it with pin
you will need 2x pins with 3 mm in diametr, also i recomend you use steel pin instead of printable one.
if butstock slide to much easily, heat it with lighter and band it a bit, i tryed to tune dimensions however your printer may be more or less accurate.
All shoould fit well, if not let me know!
License:
Creative Commons - Attribution - Non-Commercial - No Derivatives
