JGMaker Magic SKR 1.3 Adapters

Adapters for installing the SKR 1.3 Mainboard into the JGMaker Magic 3D Printer.

There are some required modifications to the JGMaker Magic's wiring to use any standard mainboard in that printer. The factory mainboard from JGAurora uses non-standard connections and wiring for its hot-end, hot-bed and display (most notably). So refer to the source Thingy of this Remix, and its video, for making those changes so you can use not only the MKS GEN L mainboard, but also the SKR 1.3 in the JGMaker Magic (and probably most other standard mainboards): https://www.thingiverse.com/thing:3655968

The Left and Right bracket, along with the Fans Mount needed to be modified for the SKR 1.3, as the SD Card sticks out 4mm and the USB socket is moved over 2.5mm from the MKS Gen L mainboard. So use these STL files for the SKR 1.3

The included video shows how to install TMC2130 and TMC2208 in SPI, UART and Standalone mode on the SKR 1.3 for use in the JGMaker Magic:
https://youtu.be/hhOVGcjdt8c

The modified Marlin firmware source files can be found here: https://drive.google.com/open?id=1C_RHM-4_GNtoWyBfD1BXH7Rsmt59ENB-

BEFORE attempting these changes (they WILL VOID your Printer's Warrenty), It's highly recommended that you:

1. Read all the information on modifying the JGMaker Magic here (and watch its corresponding video) https://www.thingiverse.com/thing:3655968
2. Watch this thingy's video.

Then, if you still want to tackle this project - Enjoy!