TalonClaw - Ram Rod with Carbon Fiber Rod

Note: I have made an updated version that allows easy release of the MAG in the forward position.

https://www.thingiverse.com/thing:4103641

3d Printed Ram Rod for TalonClaw with a Carbon Fiber insert for strength.
Note: the tolerance is tight to fit the rod inside (was printed on a Prusa i3 MK3)
The model in the photo is a proto-type I change the model slightly to hold O-rings in place better if you use them.

0.2mm layer height
35mm infill
5 perimeters / walls / Top / Bottom layers

Carbon Fiber Rod (I also use these for the rod spacers on the front bottom threaded rods)
8mm OD / 6mm ID

8mmx6mmx500mm
https://www.aliexpress.com/item/4000058927961.html

Carbon Fiber Rod is meant to slide all the way inside the printed part, it should not stick out the end.

I used a M3 machine screw to help hold the rod in place, I was also think some glue stick may work as well.

I also uploaded a STEP file for those that want to modify the model easily in CAD.