RuneWars Revised Edition (Sleeved Cars and Smaller Prints)

This is a revised insert for RuneWars Revised Edition based on https://www.thingiverse.com/thing:3888727. This has been modified to print on 200mm printers and has a few other modifications.

** Instructions **
I printed everything with no supports @ .2mm layers.

• RuneWars - Base 1-4: Print each of these pieces and use supper glue to glue them together. These need to be assembled in order clockwise 1-2-3-4 so that the tiles will fit properly.
• RuneWars - Cards 1-2: This is a modified version of the card box split into two pieces.
• Runewars_Card_Box: This is the original version for convenience, you can print it instead but don't print both.
• RuneWars - Tokens: A modified version of the token container that fits better.
• RuneWars - Player Board 1-2: A redone player board tray, print each piece and glue them together. You shouldn't need supports even though there is a bit of overhang in the corners.
• RuneWars - Player Boards: Or print as one piece but don't print both versions.
• RuneWars - Spacer: An optional small spacer between the Player Board and Card Box if the CardBox is two pieces.
• RuneWars - Card Spacer: Print one of these with each faction box if your cards are sleeved if you make them in different colors, or just 4x. Then slide into the area and store cards at an angle to fit better.
• Runewars_Faction_Box_L/R: Print 2x of each version, possibly in different colors. They will hold all faction bits and cards.
• HeroPlayerMarkers: Print these from https://www.thingiverse.com/thing:617436 in faction colors. they can be snapped on hears to easily identify who own's what hero during game play. Print these are 105.5%(may need to test and adjust) scale with 2 walls, 0% infill, and 0mm top and bottom walls. This will produce a outer rim that is solid and flexible but more durable then using vase/spiral mode.