UPDATE !!!!

I was looking for a holder for my Sofirn SP32a flashlight where you don't have to push the lamp in. Where you don't have to exert any force to break the plastic.Here is the Solution. Not small, but usable. There are two holes to mount the holder on the wall. Things to print:

1. 1x Stand :
   • V1 - small - 3cm
   • V2 - tall 6cm
2. 1x middle Bumper
3. 1x lower bumper
   • V1 - plain version
   • V2 - small extrusion in the middle to hold the flashlight centered
   • V3 - plain version with mount for a small magnet(6x2mm) on the downside
   • V4 - plain version with mount for a bigger magnet(25x3,5mm) on the downside

You have to print the bumpers with TPU or another flexible material. The pink bumpers are printed with REC Flex Pink. The violet bumpers are printed with Filament PM - RubberJet TPE88 – metallic violett from the german store schmelz.bar The black parts are printed with ASA / Apollox from FormFutura, but you can use any other material.

Update:

17.02.2020:

• change Lower-Bumper V4. They are closer to the middle, but a little wider.
• add solid versions from stand v1 and v2 whith solid bumper to print with solid material.