Woodturning: curved skew chisel grinding jig

CSGJ - curved skew grinding jig based on Wolverine grinding platform.
It consists of three parts:

1. platform
2. triangular slider (2 version)
3. limiter
   The holes are configured for three skew sizes:
   3/4 inch (19 mm), 1 inch (25.4 mm), 1 1/4 inch (31.75mm)
   See the picture for settings
   For repeatability of sharpening, the platform must always be placed at the same distance from the wheel - 34 mm to the center of the first hole in the platform.
   You can use a special version (SE named) of the angle template to configure the platform:
   https://www.thingiverse.com/thing:3948746

Slicer setting:
Platform
0.3 mm layer
support ON
!!! Platform must be printing with 100% infill for hardness !!!
Slider & limiter
0.12-0.16 layer
15% infill
After printing, calibrate the hole with a 5.5 mm drill bit
The slider has two versions:

• with a printed pivot
• with a threaded hole for a DIN912 M3x6mm screw (stainless steel)

See also
regular skew guide:
https://www.thingiverse.com/thing:4005392
oval skew guide:
https://www.thingiverse.com/thing:4125029