Extrusion Corner Cover 2020-2040

Cover for the corner of sharp extrusions. Made this for a CR-10 because the original extrusion guard just kept slipping out. This was modeled for a 2020 to 2040 extrusion joint (based on the screw hole placements), may work on other combinations, just make sure the hold placement is in the correct spot.

Requires:
2 x Hex head M3x8mm screws
2 x T-nuts

Non-referral links for reference or purchase:

Screws: https://www.aliexpress.com/item/32810872544.html (M3, 8mm)
T-nuts: https://www.aliexpress.com/item/32814359094.html (M3)