January 23, 2020
Description
This is beta version of STLs for Floater 3 inch Cinewhoop Drone
8x 30mm standoffs with 16x M3 screws required. Glue together top and bottom to have it watertight. Wires also have to be secured properly with hotglue or something.
After printing top part, tear off the rim from the middle to fit cover.
Cover is supposed to be sealed using insulation tape.
Version 0.2 added:
Bottom - added ribs to ducts, weight optimization
Top - weight optimization
Optional reling to mount battery and gopro (with strap)
Compatible with v0.1
Design and build information can be found at group: https://www.facebook.com/groups/844374872701734/
Recommended filament: https://fiberlogy.com/pl/filamenty/nylon-pa12/
Performance: https://www.youtube.com/watch?v=awP8rdmuRn0
If you like this project and want to support it - any donations will be appreciated :)
List of the components used for prototype build:
FC: Matek F411-mini, Betaflight v4.1 https://www.banggood.com/custlink/K3KKbzMnL7
ESC: Airbot ORI32 https://www.banggood.com/custlink/DDmKszMNoB
Motors: Iflight Xing 1408 3600KV https://www.banggood.com/custlink/Gmm3n2UAif
Props: Gemfan 75mm Ducted https://www.banggood.com/custlink/GvGmNzMnlC
Fpv Cam: Caddx SDR1 https://www.banggood.com/custlink/m3GmAUqs0B
VTX: IRC Tramp HV https://www.banggood.com/custlink/KGKvAzzQL9
Tx/Rx: FrSky XM+ https://www.banggood.com/custlink/vvGGAzkQ0W
HD Cam: GoPro Hero7 Black
License:
Creative Commons - Attribution
mroowa
