DJI FPV Caddx Vista 87mm 3S whoop with 40mm / 1.6inch propellers

Whoop frame for 110x / 120x motors and 40mm / 1.6 inch propellers. Fits Caddx Vista and 16x16mm mount stack. Wheelbase is 87mm.

Example setup:
iFlight BeeMotor 1103 10000kV / T-MOTOR 1103 11000kV / HGLRC 1103 10000kV
40mm propellers
HGLRC FD413 / FLYWOO GOKU F411 16x16mm stack
450mAh 3S lipo (long)

Version 1
(bottom.stl & top.stl)
This was inspired by Diatone Tina whoop.

Version 1.5
(bottom_round_holes.stl & top_round_holes.stl)
Round holes in ducts instead of rectangular ones.

Version 2
(bottom v2.stl & top v2.stl)
Lighter and quieter construction.

Version 3
Less ducts

Full ducts version was abandoned due to weight and loudness.

Use flat head 2x5mm (or similar) wood screw to fix the top. 10mm velcro strap is recommended.

Please use a good camera protector as it is protruding quite much. Example:
https://store.dji.com/product/dji-fpv-lens-protector

Print it with materials such as PCTPE, PP, Colorfabb HT, Colorfabb XT, Nylon.

To save on weight you can use this naked camera adapter:
https://www.thingiverse.com/thing:4535131

CAUTION
Depending on final hardware setup and materials used such small and heavy drone can generate a lot of noise. Please mind sound levels and use hearing protection if needed - especially when flying in tight spaces or near people. Use it at your own risk.