February 1, 2020
Description
SOTA BEAMS does not provide a chassis for mounting their low pass filter boards. I have created one which allows the placement of the jumpers to the proper band you wish to transmit on without the need of removing the cover.
To mount the board and fasten down the cover I just used 4 RC model servo screws.
I used some 3mm rub on letters to show the band placement in the enclosure which matches the jumper positions. You can also just write them on with a marker if you like.
The lead ins to the jumpers also touchdown on the board so if you drop the jumper it cannot slide under the cover which is a nice feature.
WSPRlite and its low band pass filters can be found at their website at the link below.
http://www.sotabeams.co.uk/
License:
Creative Commons - Attribution
Racer
