February 4, 2020
Description
BONDTECH extruder upgrade accessory.
Owners of the FlashForge Creator Pro (2016 - dual extruder) 3D printer that want to print specialty materials will want to upgrade the cold side of the extruders with the BondTech upgrade. (Link below)
The Bondtech upgrade allows you to print with Carbon Fibre and other difficult materials(also requires hot end upgrade)(link below). After upgrading the printer, the extruder cover no longer fits on top of the extruders. This extruder cover is the main support for the large loom of power and thermocouple wires connecting to the extruders.
This printable project installs on top of the extruders using the original mounting screws. It is a minimalist wire loom support that does not impede the ability to open the Bondtech extruder feed to service the filament.
Once installed, add a ZIP-tie to keep the loom of wires secure.
Bondtech FlashForge Creator Pro(2016) upgrade kit.
https://www.bondtech.se/en/product/flashforge-pro-2016-kit/
MicroSwiss MK10 hot end upgrade for high-temperature materials
https://store.micro-swiss.com/products/micro-swiss-mk10-all-metal-hotend-kit
Buy these kits online (CANADA / On)
https://www.digitmakers.ca/products/bondtech-extruder-upgrade-creator-pro-2016-and-later
https://www.digitmakers.ca/products/all-metal-mk10-hot-end-0-4-mm-b-upgrade-b-by-micro-swiss
License:
Creative Commons - Attribution - Non-Commercial - Share Alike
cpayne3d
