ESP32 Marauder Enclosure

This is the enclosure used for the ESP32 Marauder.

Components of the project:

• ESP32 Marauder
• 4 M2.5x10 Hex screws
• Enclosure face plate
• Enclosure body

How to do the thing:

1. Print both the face plate and the body
2. Mount the face plate onto the screen of the Marauder by putting the pegs through the holes on the screen PCB
3. Lower the Marauder into the body of the enclosure and ensure the battery sits within the trench in the center of the body
4. Fasten the face plate to the body using 4 M2.5x10 hex screws.
   • The top of the screws should be flush with the surface of the face plate

I have successfully printed this enclosure in PLA and PETG. More information about the ESP32 Marauder can be found here at this github repo or in this Youtube Video. Please feel free to voice any questions or concerns.