ESP32-GRBL 4.1 Enclosure (version 1.0) 3D Printer File Image 1

ESP32-GRBL 4.1 Enclosure (version 1.0) 3D Printer File Image 2

ESP32-GRBL 4.1 Enclosure (version 1.0) 3D Printer File Image 3

ESP32-GRBL 4.1 Enclosure (version 1.0) 3D Printer File Image 4

ESP32-GRBL 4.1 Enclosure (version 1.0) 3D Printer File Thumbnail 1

ESP32-GRBL 4.1 Enclosure (version 1.0) 3D Printer File Thumbnail 2

ESP32-GRBL 4.1 Enclosure (version 1.0)

UechiMike

February 7, 2020

Description Comments Tags

Description

This is an enclosure for Bart's awesome ESP32-GRBL board version 4.1. If you haven't heard of it you can find out more via Tindie where it is sold (https://www.tindie.com/products/33366583/grbl_esp32-cnc-development-board-v41) or via the Github project (https://github.com/bdring/Grbl_Esp32). Essentially it's a self-contained G-Code based controller, running it's own web server with it's own local SD storage.

This enclosure has a probe connector on the front as well as STOP/RESET, HOLD, RESUME buttons up front and an opening for a power connector and the X/Y/Z wiring out the back. This is version 1 of the enclosure and it's admittedly a little tight but workable.

Notes:
Currently no access for micro-usb or SD card. Next version I may rotate the board so these connectors are accessible.

Feedback/Ideas/Improvements welcome!

License:

Creative Commons - Attribution - Non-Commercial