Dust Rat for vacuumcleaner

---the Dust Rat---
-fits a 40mm vacuumtube

if you like give s thumbz up
pretty easy to make i used 25% infil and black PLA
use the glue for fitting the tube to the smalhole's
then use hotglue in the 4 corners inside the vacuum adaptor the more the better

you just need

-5mm tube 5mm OD 4mm ID(link below)
-glue
-hotglue

-TIP-
the longer you make it the more stiff the tubes will be so do what fits your needs
a small hairband also inproves use to regulate stiffnes of the tubes

enjoy and share grtz M_X

tube link---
https://www.aliexpress.com/item/4000202446790.html?spm=a2g0o.productlist.0.0.8e03edd533rBq5&algo_pvid=e8d54856-9f5e-452a-8a91-4c822bb60d6a&algo_expid=e8d54856-9f5e-452a-8a91-4c822bb60d6a-21&btsid=0b33eb5d-cb12-471b-ba5e-bd7badbe9192&ws_ab_test=searchweb0_0,searchweb201602_4,searchweb201603_55

inspired by dust dady like seen in gif above