Cups for Water Vapor Permeability test (ASTM E96)

These are cups designed to test the properties of polymer plastic films. I use it to test the moisture barrier performance of biofilms.

The cups are filled with either water (or dessicant), and the sample loaded in between the gaskets and held tight with the convenient screw lid. The evaporation (or absorption if using dessicant) of water in the cup (measured on a scale) over time determines the "Water Vapor Permeability" compliant with the ASTM E96 calculated as shown in here: https://www.youtube.com/watch?v=wulHes6Dm9E.

The 50 mm diameter cup features ridges every 5 mm from the surface that makes it easy to fill the water to the correct level. 2-3 ridges down (10-15 mm) is the preferred level.

The gaskets can be cut from a sheet of rubber, neoprene or similar hydrophobic material. (OD 68mm / ID 50mm). Or simply print two gaskets here in TPU or other flex.

The screw lid features M70 x 1.5 threads that keep the sample film tightly in place, and requires no additional screws.

---

NOTE: I will test these cups over the next few days and determine if it needs further modifications. For now though, I am quite pleased with the outcome.