February 10, 2020
Description
This is an adapter for upgrading to a 5015 radial fan on the Prima Creator P120 V4 printer. Or any of the identical printers that are sold under other names.
A cheap easy upgrade that will improve overhang printing and small part printing. For even better result use a fan duct with part cooling from two sides.
Print the adapter. Remove the old fan. Resuse the fan screws to attach the adapter to the existing fan duct. Attach the new fan to the adapter. It is a tight fit. Secure with a tiny drop of superglue.
Cut the fan cable and solder it to the new fan.
License:
Creative Commons - Attribution
59
Snabel_a
