Ender 3 - PSU Mod

Another PSU mod for Creality Ender 3 (Chinese PSU)

No modifications needed, it is a direct swap with the original plastic base that comes with the printer.

It fits this energy meter:

https://fr.aliexpress.com/item/32374748643.html?spm=a2g0o.productlist.0.0.374b665eseiKJy&algo_pvid=5400aa4f-6506-4b3c-87c1-d1b86e029080&algo_expid=5400aa4f-6506-4b3c-87c1-d1b86e029080-10&btsid=0b0a182b15815017194196507e2bd0&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_

It also has openings on the bottom to route cables for the display and power to the printer as well as a led cables.

The PSU does come very close to the AC terminals of the Kettle plug (IEC plug), so please make sure yours has the rubber boots on the spade lugs to prevent a short.

I am busy remixing the All in one electronics enclosure from Teaching_Tech, so this psu mod and the openings for cables are made to work with the remix.

I will post the remix of the enclosure soon.

Please post your makes, and report any issues you encounter with this design.

I made the walls hugging the PSU 1.6mm, this works well with a 0.4mm nozzle.

The walls are a tad thin, so be gentle :)

Attached are a few images of my test prints.