Rack Mount Enclosure Accessories for PRUSA MK3s + MMU2S

In Fall of 2019 I decided I wanted a metal case to enclose my Prusa MK3S + MMU2S. Mostly for safety reasons and piece of mind. I found the NavePoint 18U 600mm Depth Networking Cabinet and it seemed like a reasonably priced option that would fit the MK3 nicely with plenty of room for spools, access to the MMU unit and retract banks(These are really cool if you haven't seen them before). Navepoint also makes a shorter version that still fits the MK3
NavePoint 15U 600mm Depth Networking Cabinet.

I set about designing some components to mount the spools and other components, and seal up the case. Here is the results of my efforts. I am now finally getting around to posting this after sitting on it for a year. Enjoy.

I know I shouldn't have my power supply mounted in the case but I haven't gotten around to moving to the exterior. I think the cables should be long enough to fit out the bottom slot in the case and allow the power supply to mount on the back of the case.

Additional Components I used:
9x1 disc magnets for various attachments
5mm Wide 1mm Thick adhesive backed weather striping to seal around side panels.
Smoke Detector (the one I bought wirelessly connects to rest of the smoke detectors in my house and is mounted with some super glued 9x1mm disc magnets)
[LED Strip Lights] with adhesive back (https://www.amazon.com/gp/product/B00MHLIFO8/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1)
[LED Cord Extension] used to allow the dimmer to be mounted up fromt (https://www.amazon.com/gp/product/B00FTH6WNS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1)
[Temp & Humidity Sensor] for reference (https://www.amazon.com/gp/product/B07QC7JRDP/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1)
M3 x 12mm flathead self tapping screws