The "UltraSonic" a Brushless, Touchscreen Foam Dart Blaster

Welcome to the UltraSonic Foam Dart Blaster .. that is fully compatible with standard foam darts and mags from leading FDB manufacturers.

A Talon Mag version of this blaster can be found here.
https://www.thingiverse.com/thing:4266387

Facebook Group
https://www.facebook.com/groups/MakingStuffAwesome/

** Please Consider Supporting Me On Patreon **
https://www.patreon.com/Ultrasonic2

The features are to long to list here so i suggest you watch the video instead. However here are some features listed below.

• A flywheel blaster .(not spring powered) this results in high rates
  of fire.
• Can be changed between "High" and "Low" performance modes with the
  use of the historical "Rev" Trigger. This allows you to engage with
  close and far targets without having to shoot close targets or small
  children at short range with high power,which can lead to injury.
• Selectable Single, Burst and Automatic fire control.
• 2 stage trigger .. where part pull is Semi/Burst and fully pulled
  back is auto (this prevents fumbling around trying to change a manual
  switch position.
• Solenoid dart pusher. This provides a physical hammering felling when
  firing for a more "Realistic" feeling.
• 2.4" touch screen User interface.
• Screens UI colours and Images are fully customizable to suite your
  tastes.
• Hitlog and statistics.
• Round timers.
• Adjustable rate of fire.
• Adjustable Flywheel rpm and therefore FPS (power)
• Built in Ammo Counter.
• Can be fully "Lock down" allowing the blaster to be used where high
  FPS is not allowed and OR where high rates of fire are not allowed.
• Ergonomically the blaster has a large battery behind the grip which
  moves the center of gravity further back making the blaster less
  front heavy and therefore easier to one hand and maneuver (Run and
  shoot with).
• built in adjustable "Stock" for all you snipers out there.
• Contains a Multi part flywheel cage that takes into account print
  direction, over hangs and print bed surface to provide excellent
  accuracy.
• Has many "Windows" (You need to install clear protective plastic) to
  allow you to see the flywheels spinning, the solenoid moving and the
  ammo in your mag
• Uses Real carbon fiber parts to reduce weight and to break up the "3D
  Printed" look
• Designed with the intention of being as simple as possible to wire up
  as possible so "Anyone" can reproduce the blaster.

The Thingiverse Download only contains the 3D printable files parts lists and so on and be found on this Google Doc
https://docs.google.com/spreadsheets/d/1f2DEZAYVniUpHI5LzQLLnn9pqvP_sPxvivWuYcsTUrE

The Licence you agree to when downloading this "Thing" prevents you from making a profit from MY "Thing". This means you CAN NOT sell this or any of my other "Things" on places like Ebay, Facebook, Forums or Etsy. You also may Not sell My parts as part of a another complete blaster. I don't profit from putting this thing as it's a Free download and therefore no one else should do too. HOWEVER if you wish to make and sell this blaster or any parts of it you're more than welcome to contact me and i'm sure we can come to an agreement, actually i encourage this. If you wish to use my electronics and programming but in a different blaster also drop me a line.

Requires a Printer that can print 200mm wide and 200mm tall. Due to the print direction The "Overhang" performance of your Printer is critical.
It is Strongly recommended that you print the blaster in "Esun PLA +" as this has FAR superior drop resistance.

The information contained on My Website Ultrasonic2.com Youtube Channel, Facebook Group Thingiverse Page or This application (the "Service") is for general information purposes only. I Michael Dixon assumes no responsibility for errors or omissions in the contents on the Service.
The information held within these “Services” Should be considered Experimental and anyone using the information provided accepts the strong possibility that the uses of this information could lead to some kind of failure. In no event shall I (Michael Dixon) be liable for any special, direct, indirect, consequential, or incidental damages or any damages whatsoever, whether in an action of contract, negligence or other tort, arising out of or in connection with the use of the Service or the contents of the Service. I reserves the right to make additions, deletions, or modification to the contents on the Service at any time without prior notice. I do not warrant that the website or application is free of viruses or other harmful components.

• Never operate the blaster without hair tied up, the windows installed
  and without wearing safety eye protection.
• While the blaster will allow you to fire Foam darts at high
  velocities, this does not mean you should do, or is safe too do so. You alone accept the responsibility of using this blaster.

Update 6 April 2020
Updated wheels to G4.5 and added 9mm crush wheels

Update 14 April 2020
Updated wheels

Update 29 April 2020
Added support for FTW solenoid.