**Wardrobe Space Saver**
This is a space saver for your wardrobe.
The hook can move freely and lock into 3 positions, you can also turn the hook 360°.
There are only little supports needed for the print and the hook joint is printed in place, so no assembly will be needed there.
**Assembly guide:**
1. Print the hook and the main body, you can also use the amf or gcode file which is already pre configured.
2. Turn the hook joint a little to set it free, it should move easily afterwards.
3. The hook can be guided in to the main body through the opening.
I recommend to use the .gcode or .amf file as this is already correctly orientated and sliced.
+++++++++++++++++++++++++++++++++++++++++++++++++
If you like this file or need some adjustments feel free to leave a comment. A rating or tip is also welcome and may check out my other designs!
nils_kal
