February 23, 2020
Description
Hello,
this is a DIY solar power bank with a lipo battery of 5000mAh.
You need :
1-remove the USB connector on the solar board and solder + and - wire to the output of the micro usb on the charge board (you have the GND on the back left and the + is on the right : more easy to solder the capacitor just near the back of the connector).
2-Solder the solar panel to the + and - on the solar board.
3-Solder a batterie (5000mah is a good choice) to the batt+ and - of the power bank board.
You can charge the battery with the micro USB of the power bank board or charge with the solar panel (quite a long time).
The solar panel is more to reduce the discharge than to completly charge the battery, but if you let the solar panel under a bright sun, it will charge the battery between 4 and 5 hours.
License:
Creative Commons - Attribution
2,044