Hydra Fan Duct Ender 3/Pro Remix [EZABL | BLTouch]

Ender 5 / CR10 users:
I don't own these printers and there are no accurate CAD models of them. Be sure to let people know in the comments what does and does not work. I know the original thing had a bracket specifically for the Ender 5.

This is compatible with the Heat Creeper by iAM_B3nFPS as I am using it.
https://www.thingiverse.com/thing:4155280

F3Z File Included

Install Notes:
Install both Bases
Install both 40mm fan and hat loosely then tighten them
Install 5015 or 4010 fan ducts last and the screws should not bottom out just snug.

Supports:
Bowden
Direct Drive Stock Extruder
Direct Drive CR10s Pro Dual Gear Extruder
https://www.amazon.com/gp/product/B07SY745CF
Direct Drive Bondtech BMG
EZABL v1, v2, v3, and Pro
BLTouch
Dual 5015 Fans
Dual 4010 Fans
Stock Hotend
Micro Swiss Hotend

ABL:
EZABL = -61,-14
BLTouch = I forgot to look, let me know ¬_¬

Changes:
Redesigned EZABL and BLTouch Mounts entirely
Lots of reinforcements everywhere
All screws now use M3 nyloc nuts! Except for ABL Mounts which uses regular M3 nuts
Tons of little refinements
Cable Clip fits better
Increased material around fan duct nozzle to reduce warping from heat
None of the Hats have been changed

Fan Guard Used:
https://www.thingiverse.com/thing:4183987

BOM:
M3 x 0.5mm 304 Stainless Steel Self-Lock Nylon Inserted Hex Lock Nuts
https://www.amazon.com/gp/product/B075ZZW7VL
1600 Pcs Stainless Steel 304 M3 Hex Socket Button Head Cap Screws
https://www.amazon.com/gp/product/B07L65DHV6
Noctua NF-A4x20 FLX
https://www.amazon.com/gp/product/B072JK9GX6
2x Sunon MagLev 5015 Fan MF50151V1-B00U-A99
https://www.mouser.com/ProductDetail/369-MF50151V1B00UA99
EZABL Pro
https://www.th3dstudio.com/product/ezabl-pro-plug-print-auto-bed-leveling-kit/