February 28, 2020
Description
I wanted to make a cool larp ingame light based on a flashlight that looks awesome on an alchemist table, altar, ritual ground etc.
For this purpose I used those standard ali express led flashlights you can get in many colours and which are very reliable. (added picture of this flashlight)
It features a base piece that can be printed in a non translucent material and be painted for added realism that hides the flashlight. Multiple light up crystal or gemstones shapes ar available for the top piece. These should be printed in translucent PLA and are then screwed on top in such a fashion that is maximum rain proof.
The small pyramid shape needs to be added in the base bottom and can be used to push the flashlight button without having to screw the whole assembly open.
You will need to remove the clip screwed on the flashlight, do so with a set of pliers or wirecutters for finer grip. Also remove the lens and lenscap from the flashlight, it makes the flashlight smaller and makes it so that the sides of the crystal base also light up.
For printing purposes the crystal is already designed with supports in the bottom screw on cap part, you will need to remove the support structure. Grabbing it with a set of pliers and lifting it out should do the trick. With some minimal bridging effort your printer should be able to print this perfectly.
"Crystal lamp 4" is the base filename and "crystal lamp 18" the button insert
all other files are different crystals
And if you want to make your own crystals I added a 'crystal base for making your own' STL which you can use as a base for adapting this to your needs.
License:
Creative Commons - Attribution - Non-Commercial
Egghebrecht
